Here is another Marble jet filament from PM filament.
I did try the Dark version and I loved it so Yes I had to try out the light version also.
My setup and Print job file is going to be the same as I did on the Dark version.
Here is the basic info on the filament
Material MARBLEJet, based on PLA, contains a mixture of special additives that will make your models have the look of stone/marble. The material is biodegradable and suitable for printing large objects.
- Materiale: PLA
- Diameter: ⌀ 1,75 mm
- Tolerance: ± 0,05 mm
- Pakke: netto 0,5 kg
- Temperatur Hotend: 200-230 ° C
- Temperatur Heatbed: 20-60 ° C
My setup for the test for the print is Sidewinder X1 with Hemera direct drive extruder.
File I will print is Gargoyle Statue from Thingiverse you can get the file here
My Simplify3D setting are
- Nozzel 0.4
- Layer 0.2
- Top solid layers 7
- Bottom solid layers 6
- Outline / shells 2
- Infill 15%
- Infill internal Grid
- Infill external Rectilinear
- Support None
- Bed Temp 60 degrees
- Hotend Temp 1 layer 210 – 2 layer 200 – 3 layer 195 degrees
- Cooling 2 layer 90%
- Print speed 90 mm/s
This filament is easy to print with. It makes a really good and fine finish to the print.
This is for sure something that I love and have to get more of. I did get this role of filament here in Denmark and I dont think that the price on the filament is high when the quality is this good and easy make very good prints.
There is no smell from the filament when printing.
Just remember to get good print you you have to calibrate your printer and for very good finish on your prints a good nozzle is importen not a 50 cent nozzle. Nozzle like this from a Danish shop are very good and last alot longer than the cheap once.
This is the result of the print job.
Very nice color mix in the filament, easy to print with. Good quality PLA filament, very good finish in the print. Just like the dark version only color is different
- Print quality
- Easy to print with
- Color mix