Filament PM PLA Graphite Black

Filament 1,75 PLA graphite black 0,5 kg

PLA Graphite black – Excellent Final look of the Printed Object.
PLA is a thermoplastic, further classified as a polyester plastic. It has the highest heat capacity and the lowest thermal conductivity relative to other polyester plastics.

Material used primarily for home 3D printing. This material is gaining more and more popularity due to unpretentious 3D printing and interesting visual quality

Printer setup for the test

Black Cat from the Spiderman Comics prints without any support.

The File for Black Cat you can download from My mini factory here

My Simplify3D setting are

• Nozzel 0.4
• Layer 0.2
• Top solid layers 6
• Bottom solid layers 5
• Outline / shells 2
• Infill 10%
• Infill internal Grid
• Infill external Rectilinear
• Support None
• Bed Temp 60 degrees
• Hotend Temp 1 layer 210 – 2 layer 200 – 3 layer 195 degrees
• Cooling 2 layer 85%
• Print speed 90 mm/s

I just love this filament it looks really cool and surface is very smooth and extremely fine.

I just used the same profile for this filament as I print with for normal PLA.

The texture is the Graphite filament is very nice and looks very good in the prints.

Result of the print job

No cleaning done on this print.

Just remember to get good print you  you have to calibrate your printer and for very good surface on your prints a good nozzle is importen not a 50 cent nozzle. Nozzle like this from a Danish shop are very good and last alot longer than the cheap once. I’am on this setup using a volcano but you can also get that in that shop.