FLsun Q5 – Affordable Delta 3D printer

• Layer height: 0.1 mm
• Feeder system: Bowden
• Extruder type: Single nozzle
• Nozzle size: 0.4 mm
• Max. build volume: Ø200 x 200 mm
• Max. extruder temperature: 270 °C
• Max. heated bed temperature: 110 °C
• Max. print speed: 60 mm/s
• Closed print chamber: No
• Bed leveling: Automatic
• Print bed: Heated
• Display: Color touch screen
• Connectivity: SD card, USB
• Built-in camera: No
• Resume print: Yes
• Filament sensor: No
• Frame dimensions: 300 x 300 x 650 mm
• Weight: 7 kg
• File types: STL, OBJ
• Technology: FDM
• Year: 2019
• Assembly: Semi-assembled
• Mechanical arrangement: Delta
• Motherboard: 32 bit MKS Robin Nano V1.2
• Drivers: 3 TMC2208 an 1 4988 for the extruder

FLsun Q5 – Packaging

The FLsun Q5 comes very well packed and protected.

Assembly

The FLsun Q5 is very very easy to assembly, and a beginner can easy do this without any help. 1 Thing more there do it so easy is that all the screws al the same so no need to worry about taken the wrong once. To show you basic and short how easy it is.

When you are going to connect the wires you cant do this wrong, The wire plugs have differnt colors. 1 red, 1 yellow, 1 white and then 1 white where there is written LEVEL on for your level probe/sensor

Now you are ready for autolevel and set there zero offset.

Level probe

This is also very easy and with the small guide there comes with the printer there is no problem.

Here is how the printer level bed 27 points

After the level you have to set zero offset so the nozzle comes down to the bed and ready to print.

You do the like this….

Take of the level probe

In the menu it blink on offset push the button.

Use a A4 paper to adjust the distance between the nozzle and bed. you to that by using the + and –  to you fell a light drag on the paper when you move it. The push the SAVE button… now you are done and ready to to your first print.

All is written on 1 pcs of paper there comes with the printer very easy to follow and with pictures so you are100% that you do it right.

First test print

Now for the test print there is on the SD card there comes with the printer

I was surpriced that is came out this good and it prints very well but is was that the print so we see later how is do with other prints.

More test prints

This print specs.

• Material used: Spectrum PLA Light Gray
• Slicer used: Simplify 3D
• Extruder temperature: 200 ° C
• Bed temperature: 60 ° C
• Layer height: 0.2 mm
• Infill: 20%
• Top layers: 6
• Bottom layers: 5
• Speed: 80mm / sec

This print specs.

• Material used: Azurefilm Slik Rose
• Slicer used: Simplify 3D
• Extruder temperature: 200 ° C
• Bed temperature: 60 ° C
• Layer height: 0.2 mm
• Infill: 20%
• Top layers: 6
• Bottom layers: 5
• Speed: 70mm / sec

This print specs.

• Material used: NO NAME BLUE
• Slicer used: Simplify 3D
• Extruder temperature: 200 ° C
• Bed temperature: 60 ° C
• Layer height: 0.2 mm
• Infill: 15%
• Top layers: 6
• Bottom layers: 5
• Speed: 70mm / sec

This print specs.

• Material used: NO NAME BLUE
• Slicer used: Simplify 3D
• Extruder temperature: 200 ° C
• Bed temperature: 60 ° C
• Layer height: 0.15 mm
• Infill: 20%
• Top layers: 6
• Bottom layers: 5
• Speed: 80mm / sec

This print specs.

• Material used: Spectrum PLA Forest Green
• Slicer used: Simplify 3D
• Extruder temperature: 200 ° C
• Bed temperature: 60 ° C
• Layer height: 0.15 mm
• Infill: 20%
• Top layers: 5
• Bottom layers: 5
• Speed: 85mm / sec

The test prints came out very well and better than I hoped. FLsun Q5 print fast and do it well.

After Sale Support

I did not have to contact them everything worked and much better than I did expect.

My final Verdict.

I did test the Flsun Q5 for some weeks and did not have any problem with it.

I’am really impressed how the FLsun Q5 perform in speed and quality. It is a very low cost delta 3D printer that is for sure a good printer for a beginner.

FLsun Q5 only take a small space so you can easily put on your desktop and it is very quiet due to the TMC 2208 drivers on the board.

PETG filament also prints very good on the printer even at speeds 65 mm/s but for parts you need to look at 55 mm/s then it look just as good as your prints in PLA.

Would I buy it with what I know now? YES I would and if you are a beginner or all ready have a printer and looking for 1 more printer this is a good stabil printer you should look at.

Like on Facebook