I did buy this PM Beige PLA filament in a little hope that is close to the Old White filament I had. The Old white looks great when printing bones, skulls and statues.
Use is a material for the FDM (FFF) 3D printing additive technology
Material polylactid acid by NatureWork, biodegradabilic material, non petroleum product
Diameters 1,75 or 2,90 mm
Tolerance ± 0,05 mm
Weight 1,0 kg netto ± 5% / 1,3 kg brutto ± 5%
Packing spool in Vacuum ZIP bag, inserting to paper box, all in LDPE foil
Temperature HE 200 – 230 °C
Temperature HB 20-60 °C
Surface bed kapton, ultem, PET foil, commons for FDM printing
Cooling print object YES
Nozzle All diameters
Printer setup for the test
Now comes the turn for the T-Rex Skull to be printet. The Skull and the stand for it will also be postet together in this post.
The File for the T Rex skull and stand you can download from Thingiverse here
My Simplify3D setting are
- Nozzel 0.4
- Layer 0.2
- Top solid layers 6
- Bottom solid layers 5
- Outline / shells 2
- Infill 10%
- Infill internal Grid
- Infill external Rectilinear
- Support None
- Bed Temp 60 degrees
- Hotend Temp 1 layer 210 – 2 layer 200 – 3 layer 195 degrees
- Cooling 2 layer 85%
- Print speed 90 mm/s
I will later on but my profile for Simplify3D on the site for you to get.
This PM beige filament is just as easy to print with as the PM Pearl Red.
I’am really happy to see this print color it looks great for bones and skulls in color.
Just remember to get good print you you have to calibrate your printer and for very good surface on your prints a good nozzle is importen not a 50 cent nozzle. Nozzle like this from a Danish shop are very good and last alot longer than the cheap once. I’am on this setup using a volcano but you can also get that in that shop.
Result of the print job
All the Print is done with out support and no cleaning is done.
Very easy to fit together no clue just click it together.
Here it is with the stand in PM Pearl Red filament.
Easy to print with. Good quality PLA filament, very good surface in the print. It is a great color to print for bones, statues and skulls. The filament spool is abit bigger than thoose I usely get. But overall a great filament.
- Print quality
- Easy to print with